how to grow bonsai

English Elm Bonsai Progression – The English Elm Bonsai Tree – Part 2

Hello everyone today we are looking at my English Elm Bonsai tree and the update is on the upper part and the lower part which were air layered and separated. The upper part is being grown as a tree on its own and the lower parts are being grown as a raft style. I last worked on it this time three years ago. So three years on the tree and the raft style are coming along quite nicely and we’ll take a look at both of them shortly.

So be sure to watch the whole video. So stay tuned. Hey it’s me Iqbal Khan, if you have not yet subscribed to mikbonsai then click the subscribe button and hit the bell icon to subscribe and receive notifications as I upload new videos. This is the front and the upper part of the air layered tree and three years ago that’s when it was done and this is where I carved it exactly three years ago and as you can see it’s starting to callus over, be interesting to see what happens when it gets to the to the end I suppose it will probably go inwards and turning the tree also some carving work was done at the top and all the way down to the side and along here and all this V was created and then this bark was removed and as you can see it’s healing over quite nicely starting to callus and it won’t be too long before it’s, the callousing comes to the end of the V.

That is the top of the pot and it’s full of debris and weeds so I’m going to start tidying it up and remove all these weeds and debris these are all weeds so I’ll remove these and also the debris this that leaves not from this tree but from neighboring trees and other few bits and pieces which trees drop and I’ll be removing all these and tidy up the pot take another look at the tree and then I’ll be doing some work with the top and I’ll carry on with this and we’ll catch up shortly.

I have cleaned the soil and freed it of debris and weeds so the green that you see is a bit of moss and I’ll give it a quick turn so you can see that the pot has been thoroughly tidied up and also the actual pot has been cleaned and I’ve always maintained that the job is not done if the pot has been cleaned so that’s turning the other way and that’s the front of the tree. We are now looking into the canopy of the tree and branches which are crossing or fighting with each other I’m going to remove and in this instance it is this branch here that I’m going to remove as I want this to develop a little bit more up here so this will be removed to make room for the other one and here we go that’s it that’s out I’ll go back in and clean it up a bit more make it flush cut looks a bit better here, where as before they were too close and just too much going on and it’s also not good for the branches lower down, as the Sun doesn’t get through.

`I have made a start working on the tree at the top the canopy, reducing, removing the dead branches and then also reducing the branches to create a much better canopy so we are basically reducing that and I’ll just go round the tree and see what else needs to be done firstly removing the dead branches. I’m going to start thinning out the foliage by pruning the leaves and again using the directional pruning method so as not to do too much wiring etc to shape it. I’m continuing with the removal of the dead stumps and dead branches and also shorting the branches, I am now going to remove this part of the branch up to about here that’s that one and this lower one will go back to about there that’s off and basically to bring the tree in, tighten it up a bit more the branches are a bit too long and I like to do the work slowly take it easy and that way gives me a chance to revisit the tree from time to time and do additional work that is necessary.

I am working to create a look where the lower branches such as this one here are longer than the upper branches and gradually work my way up that’s the strategy so I’m going to reduce this first to here, then take a look, no this is virtually same sort of length so I’ll reduce it back a bit more, to about there and now this this one will be reduced as its higher than that one and we’ll do it in two phases to start with and we’ll see how that looks and this branch here we’ll reduce it to about there and it makes a very big difference although its a few inches long but as we work towards the apex the tree is being gradually pulled in and it’ll make a denser canopy and I can see it it’s already coming along quite nicely this branch here where my hand is, just above this branch here I’m going to shorten the top one again to create that layered effect so we will take this back to where there is a few leaves coming off of it so I’ll get back to about there and now that really opens up the lower branch and again the one which is doubling back, we’ll remove that part there and also leaf prune it so that give it a little bit more of a directional prune.

Stand back and take a look, little bit better, now there are other bits which are sticking out so that’s the only way to stand back have a look, this bit is sticking out so I’m gonna reduce that to about there and have another look and also prune some of this thick foliage Dead branches come off and continue with clipping and directional pruning so it grows in a certain direction continue to move up wards, now I’m going to reduce this branch to there then we have again differential in height and this one I’m going to bring down to there so the difference between that that and then that one, that will leave it at that level but the one next to it this one here I will reduce that shortly. So it’s just like a haircut these bits are sticking out so I will shorten these then take another look and see if more shortening is necessary. It’s the old carpenters rule measure twice cut once and the same principle applies here .Now looking from that angle this branch is sticking out so I’m going to take it right back to about there and then these smaller branches will take over.

I have worked my way to the apex and now it’s time to thin this part here I’m going to remove this side branch so reduce it down to where the dead branch was and then take a look Right and now reduce this one, there is a dead stub here., and remove that and then reduce this, let’s see if we reduce it in stages to there So I’m going to have a little look, stand back and see, yes that now fits in a little bit better. Right folks there we are it’s all pruned the canopy is nice and tight and I’ll give it a quick turn so you can see it from all sides and that was a front where we started side one that’s the back, side two and that’s where we started, and the last thing that I’m going to do with this is, it’s time to feed it so I haven’t put the chicken pellets yet so these are the chicken pellets being scattered around the pot and they should keep it fed to the end of the season.

If you haven’t seen the first video then there is a link in the info card at the top right-hand corner of the screen click on that and it will take you to the first video when this tree was air layered and the air layer was separated, the roots on it are just amazing. Right folks that was the English Elm the upper part, it’s a tale of two halves and the lower part which is being grown in the raft style follows in part two so be sure to watch that. That’s all for now this is Iqbal Khan for mikbonsai in West London, until the next time. And now for the afterthought You love this . Bonsai lovers are very tolerant people they just hate bigotry, You Dig !

How to Grow Bonsai Tree from Cuttings : Create, Care & Plant Jade Bonsai Plant Guide – Elephant Bush

If You Are Interested in Bonsai Trees, Bonsai Seeds or Bonsai Care Products, You Can Compare Them From the Link in Our Description Section If You Are Interested in Bonsai Trees, Bonsai Seeds or Bonsai Care Products, You Can Compare Them From the Link in Our Description Section .

How to Start Bonsai from Nursery Plant | Creating Bonsai from Nursery Stock |//GREEN PLANTS

Welcome to my channel today i’m going to make a mame bonsai it’s a Chinese banyan tree and i bought it from nursery shop it’s a small size plant and in this stage, good choice for making a bonsai now i’m going to make it as a bonsai first we need small size bonsai pots ,bonsai tools, small soil stones and bonsai soil now slightly press down to loosen the soil and take out the plant from its pot then removing the old soil using a thin stick or bonsai root rake tool when removing the soil do not damage the main root system keep doing very patiently do not remove the all soil and do not use water to remove the soil because root ball is needed to make a bonsai next root pruning cut side roots and any roots that have grown too long and do not cut the main root and avoid damaging roots in the process just cut small and long roots and side roots if you cut or damage the main root system the tree will die soon do not remove more than 50% of all roots next re potting them into the new bonsai pots now add the bottom layer of stones this will help the good drainage and then add the bonsai soil then place and set the tree in center of the pot and fill the remaining pot space with soil completely after adding the bonsai soil remove and fill the air pockets using a stick or chopstick next add the moss and some stones on top of the soil this will help to keep the moisture after making the bonsai trees live in small pots and their world dries out much quicker than plants in the ground so close attention should be paid to watering pour water once a week thoroughly and deeply check and water your bonsai every two or three days use organic liquid fertilizer and fertilize every three weeks during the growing season and once a month in the winter keep the bonsai in bright indirect light places or direct morning sunlight is preferable and direct afternoon sun can sometimes burn the leaves to grow indoors, close to a sunny window, or outdoors year round in warmer climates thanks for watching

English Elm Bonsai Progression – The English Elm Bonsai Tree – Part 2

Hello everyone today we are looking at my English Elm Bonsai tree and the update is on the upper part and the lower part which were air layered and separated. The upper part is being grown as a tree on its own and the lower parts are being grown as a raft style. I last worked on it this time three years ago. So three years on the tree and the raft style are coming along quite nicely and we’ll take a look at both of them shortly. So be sure to watch the whole video. So stay tuned. Hey it’s me Iqbal Khan, if you have not yet subscribed to mikbonsai then click the subscribe button and hit the bell icon to subscribe and receive notifications as I upload new videos. This is the front and the upper part of the air layered tree and three years ago that’s when it was done and this is where I carved it exactly three years ago and as you can see it’s starting to callus over, be interesting to see what happens when it gets to the to the end I suppose it will probably go inwards and turning the tree also some carving work was done at the top and all the way down to the side and along here and all this V was created and then this bark was removed and as you can see it’s healing over quite nicely starting to callus and it won’t be too long before it’s, the callousing comes to the end of the V.

That is the top of the pot and it’s full of debris and weeds so I’m going to start tidying it up and remove all these weeds and debris these are all weeds so I’ll remove these and also the debris this that leaves not from this tree but from neighboring trees and other few bits and pieces which trees drop and I’ll be removing all these and tidy up the pot take another look at the tree and then I’ll be doing some work with the top and I’ll carry on with this and we’ll catch up shortly. I have cleaned the soil and freed it of debris and weeds so the green that you see is a bit of moss and I’ll give it a quick turn so you can see that the pot has been thoroughly tidied up and also the actual pot has been cleaned and I’ve always maintained that the job is not done if the pot has been cleaned so that’s turning the other way and that’s the front of the tree.

We are now looking into the canopy of the tree and branches which are crossing or fighting with each other I’m going to remove and in this instance it is this branch here that I’m going to remove as I want this to develop a little bit more up here so this will be removed to make room for the other one and here we go that’s it that’s out I’ll go back in and clean it up a bit more make it flush cut looks a bit better here, where as before they were too close and just too much going on and it’s also not good for the branches lower down, as the Sun doesn’t get through.

`I have made a start working on the tree at the top the canopy, reducing, removing the dead branches and then also reducing the branches to create a much better canopy so we are basically reducing that and I’ll just go round the tree and see what else needs to be done firstly removing the dead branches. I’m going to start thinning out the foliage by pruning the leaves and again using the directional pruning method so as not to do too much wiring etc to shape it. I’m continuing with the removal of the dead stumps and dead branches and also shorting the branches, I am now going to remove this part of the branch up to about here that’s that one and this lower one will go back to about there that’s off and basically to bring the tree in, tighten it up a bit more the branches are a bit too long and I like to do the work slowly take it easy and that way gives me a chance to revisit the tree from time to time and do additional work that is necessary.

I am working to create a look where the lower branches such as this one here are longer than the upper branches and gradually work my way up that’s the strategy so I’m going to reduce this first to here, then take a look, no this is virtually same sort of length so I’ll reduce it back a bit more, to about there and now this this one will be reduced as its higher than that one and we’ll do it in two phases to start with and we’ll see how that looks and this branch here we’ll reduce it to about there and it makes a very big difference although its a few inches long but as we work towards the apex the tree is being gradually pulled in and it’ll make a denser canopy and I can see it it’s already coming along quite nicely this branch here where my hand is, just above this branch here I’m going to shorten the top one again to create that layered effect so we will take this back to where there is a few leaves coming off of it so I’ll get back to about there and now that really opens up the lower branch and again the one which is doubling back, we’ll remove that part there and also leaf prune it so that give it a little bit more of a directional prune.

Stand back and take a look, little bit better, now there are other bits which are sticking out so that’s the only way to stand back have a look, this bit is sticking out so I’m gonna reduce that to about there and have another look and also prune some of this thick foliage Dead branches come off and continue with clipping and directional pruning so it grows in a certain direction continue to move up wards, now I’m going to reduce this branch to there then we have again differential in height and this one I’m going to bring down to there so the difference between that that and then that one, that will leave it at that level but the one next to it this one here I will reduce that shortly.

So it’s just like a haircut these bits are sticking out so I will shorten these then take another look and see if more shortening is necessary. It’s the old carpenters rule measure twice cut once and the same principle applies here .Now looking from that angle this branch is sticking out so I’m going to take it right back to about there and then these smaller branches will take over. I have worked my way to the apex and now it’s time to thin this part here I’m going to remove this side branch so reduce it down to where the dead branch was and then take a look Right and now reduce this one, there is a dead stub here., and remove that and then reduce this, let’s see if we reduce it in stages to there So I’m going to have a little look, stand back and see, yes that now fits in a little bit better. Right folks there we are it’s all pruned the canopy is nice and tight and I’ll give it a quick turn so you can see it from all sides and that was a front where we started side one that’s the back, side two and that’s where we started, and the last thing that I’m going to do with this is, it’s time to feed it so I haven’t put the chicken pellets yet so these are the chicken pellets being scattered around the pot and they should keep it fed to the end of the season.

If you haven’t seen the first video then there is a link in the info card at the top right-hand corner of the screen click on that and it will take you to the first video when this tree was air layered and the air layer was separated, the roots on it are just amazing. Right folks that was the English Elm the upper part, it’s a tale of two halves and the lower part which is being grown in the raft style follows in part two so be sure to watch that.

That’s all for now this is Iqbal Khan for mikbonsai in West London, until the next time. And now for the afterthought You love this . Bonsai lovers are very tolerant people they just hate bigotry, You Dig ! .

English Elm Bonsai Progression – The English Elm Bonsai Tree – Part 2

Hello everyone today we are looking at my English Elm Bonsai tree and the update is on the upper part and the lower part which were air layered and separated. The upper part is being grown as a tree on its own and the lower parts are being grown as a raft style. I last worked on it this time three years ago. So three years on the tree and the raft style are coming along quite nicely and we’ll take a look at both of them shortly. So be sure to watch the whole video. So stay tuned. Hey it’s me Iqbal Khan, if you have not yet subscribed to mikbonsai then click the subscribe button and hit the bell icon to subscribe and receive notifications as I upload new videos. This is the front and the upper part of the air layered tree and three years ago that’s when it was done and this is where I carved it exactly three years ago and as you can see it’s starting to callus over, be interesting to see what happens when it gets to the to the end I suppose it will probably go inwards and turning the tree also some carving work was done at the top and all the way down to the side and along here and all this V was created and then this bark was removed and as you can see it’s healing over quite nicely starting to callus and it won’t be too long before it’s, the callousing comes to the end of the V.

That is the top of the pot and it’s full of debris and weeds so I’m going to start tidying it up and remove all these weeds and debris these are all weeds so I’ll remove these and also the debris this that leaves not from this tree but from neighboring trees and other few bits and pieces which trees drop and I’ll be removing all these and tidy up the pot take another look at the tree and then I’ll be doing some work with the top and I’ll carry on with this and we’ll catch up shortly.

I have cleaned the soil and freed it of debris and weeds so the green that you see is a bit of moss and I’ll give it a quick turn so you can see that the pot has been thoroughly tidied up and also the actual pot has been cleaned and I’ve always maintained that the job is not done if the pot has been cleaned so that’s turning the other way and that’s the front of the tree. We are now looking into the canopy of the tree and branches which are crossing or fighting with each other I’m going to remove and in this instance it is this branch here that I’m going to remove as I want this to develop a little bit more up here so this will be removed to make room for the other one and here we go that’s it that’s out I’ll go back in and clean it up a bit more make it flush cut looks a bit better here, where as before they were too close and just too much going on and it’s also not good for the branches lower down, as the Sun doesn’t get through.

`I have made a start working on the tree at the top the canopy, reducing, removing the dead branches and then also reducing the branches to create a much better canopy so we are basically reducing that and I’ll just go round the tree and see what else needs to be done firstly removing the dead branches. I’m going to start thinning out the foliage by pruning the leaves and again using the directional pruning method so as not to do too much wiring etc to shape it. I’m continuing with the removal of the dead stumps and dead branches and also shorting the branches, I am now going to remove this part of the branch up to about here that’s that one and this lower one will go back to about there that’s off and basically to bring the tree in, tighten it up a bit more the branches are a bit too long and I like to do the work slowly take it easy and that way gives me a chance to revisit the tree from time to time and do additional work that is necessary.

I am working to create a look where the lower branches such as this one here are longer than the upper branches and gradually work my way up that’s the strategy so I’m going to reduce this first to here, then take a look, no this is virtually same sort of length so I’ll reduce it back a bit more, to about there and now this this one will be reduced as its higher than that one and we’ll do it in two phases to start with and we’ll see how that looks and this branch here we’ll reduce it to about there and it makes a very big difference although its a few inches long but as we work towards the apex the tree is being gradually pulled in and it’ll make a denser canopy and I can see it it’s already coming along quite nicely this branch here where my hand is, just above this branch here I’m going to shorten the top one again to create that layered effect so we will take this back to where there is a few leaves coming off of it so I’ll get back to about there and now that really opens up the lower branch and again the one which is doubling back, we’ll remove that part there and also leaf prune it so that give it a little bit more of a directional prune.

Stand back and take a look, little bit better, now there are other bits which are sticking out so that’s the only way to stand back have a look, this bit is sticking out so I’m gonna reduce that to about there and have another look and also prune some of this thick foliage Dead branches come off and continue with clipping and directional pruning so it grows in a certain direction continue to move up wards, now I’m going to reduce this branch to there then we have again differential in height and this one I’m going to bring down to there so the difference between that that and then that one, that will leave it at that level but the one next to it this one here I will reduce that shortly. So it’s just like a haircut these bits are sticking out so I will shorten these then take another look and see if more shortening is necessary. It’s the old carpenters rule measure twice cut once and the same principle applies here .Now looking from that angle this branch is sticking out so I’m going to take it right back to about there and then these smaller branches will take over.

I have worked my way to the apex and now it’s time to thin this part here I’m going to remove this side branch so reduce it down to where the dead branch was and then take a look Right and now reduce this one, there is a dead stub here., and remove that and then reduce this, let’s see if we reduce it in stages to there So I’m going to have a little look, stand back and see, yes that now fits in a little bit better.

Right folks there we are it’s all pruned the canopy is nice and tight and I’ll give it a quick turn so you can see it from all sides and that was a front where we started side one that’s the back, side two and that’s where we started, and the last thing that I’m going to do with this is, it’s time to feed it so I haven’t put the chicken pellets yet so these are the chicken pellets being scattered around the pot and they should keep it fed to the end of the season. if you haven’t seen the first video then there is a link in the info card at the top right-hand corner of the screen click on that and it will take you to the first video when this tree was air layered and the air layer was separated, the roots on it are just amazing.

Right folks that was the English Elm the upper part, it’s a tale of two halves and the lower part which is being grown in the raft style follows in part two so be sure to watch that. That’s all for now this is Iqbal Khan for mikbonsai in West London, until the next time. And now for the afterthought You love this . Bonsai lovers are very tolerant people they just hate bigotry, You Dig ! .

Bonsai Slab Planting | bonsai trees for beginners | Grow Bonsai On a Slab // GREEN PLANTS

In this video i’m showing now making of slap bonsai bonsai slap planting and then these plants are already wired this is a cement bonsai slap on this slap i’m just making clay wall or pot materials i used to make this clay mix natural pottery clay peat moss and water if you don’t have peat moss or natural pottery clay you can make this clay using garden soil with water this clay wall must be at least 2.5 inch height because there must be enough space for planting after drying clay wall place the plant in slap pot then put the bonsai soil mix press the soil slowly then put some soil after place the moss to cover the clay wall moss retains the soil moisture and avoids soil eroding after put some stones this will protect the soil and keep moisture and also looks beautiful i’m just putting some sand for beauty finished work every day watering need for this slap bonsai use sprayer to water and over watering will affect the plants so Do not pour too much water and sunlight for bonsai bonsai needs about 5 hours of direct or indirect sunlight per day Place your bonsai at a window facing the south