Author: Deann Wood

How to make bonsai Olive or European Olive Bonsai Tree with Ginta bonsai trees #95

Quite good. Yeah, and near the leaves, underneath the branches. Ok. So if there’s a branch, obviously the leaves need to come out. It’s not a stem, it’s a branch. So the stems have leaves and the branches don’t. Branches have other branches on them, no stems. I think they’re too many as well. Shall we take off this one? Actually there are already too many which means something has to go. I think that one has to go, this one. Right, first let’s remove the leaf so we can see the tree, as there’s too many leaves around. So now we can see some branches emerging. I think this one has to go. No, because that is coming out outwards nicely, can you see? So that forms a nice, this guy, first of all is too ugly. Why is too ugly? Because it is straight absolutely, there is no ramification in it.

The little ones are always what we want because bonsai is all about small branches so we try and keep them. There are three coming out of here so… So take the biggest one out and leave the two smaller ones. How is it looking? It’s looking good. Ok, empty out your tray now. .

How to repot bonsai trees; why repot bonsai with bonsai tips and tricks; Spring care & work

How to repot bonsai trees and why we repot bonsai trees. I will also share repotting bonsai tips tricks and the odd secret which no one talks about. Make sure that you watch the entire video. Hey it’s me Iqbal Khan, if you have not yet subscribed to mikbonsai then click the subscribe button and hit the bell icon to subscribe and receive notifications as I upload new videos. After pruning, watering and feeding repotting is one of the most important aspects of bonsai to be learned as repoting has to be done on a regular basis it takes years to get it right.

However, what if you are able to remove those hurdles which setback many bonsai enthusiasts by years, even better if we were to reduce that time scale into a couple of seasons. I will show you how. you are about to discover bonsai tips tricks and secrets which will fast-track the development of your trees starting with repotting and sorting out the roots. Bonsai trees need reporting regularly over a period of time. The bonsai soil mix breaks down into fine particles over a number of years, coupled with this the root growth fills up the pot, making it root bound and difficult to water. When this happens you can use the dunking method and to see how that is done there’s a link in the info card which shows you the dunking method. You can continue watering it, using the dunking method until the next repot. The tell-tale signs which give an indication that the tree needs repotting are as follows: one – take the tree out of the pot and see what the root situation is if you see the roots going round and round in the pot, that is first indication that the tree has become root bound.

The other indication is watering, when watering has become difficult due to the soil having broken down. what is a good time to repot ? Ideally February March, in the spring and one of the things which I would like to mention is the acers and maples must be reported in February March, otherwise you have missed the window. Having said that I am going to experiment during the summer months with a cheap maple to see what reporting in the summer does to these trees and if it dies as that’s the price I will have to pay for the experiment.

Spring is also a good time to repot as the tree responds very well to root pruning and pruning of the branches. It has lots of saved up energy and as the growing season kick starts the pruning also helps with the spurt of growth. The tools that I’m going to be using during the repot, you can see by clicking on the info card and there’s a video on bonsai tools. The tree that I’m going to be repoting today is an acer buergerianum, also known as the Trident maple. This is the tree that I’m going to be repotting today. The first thing to do is to take the tree out of its pot. This is an imported tree it came from Japan few years ago it’s been the same training pot and I think it’s time to repot it. So let’s put the training pot to one side and as you can see the roots have gone ground and virtually taken the shape of the inside of the pot right down to where the pot feet were so I will basically start from the top working my way down and it’s going to take quite some time so I’ll press on with this and we’ll catch up shortly.

I have to removed quite a lot of roots and these are really thick roots, not doing anything for the tree, so remove those and just tidy up a little bit more at the bottom and these are root scissors it’s important to keep the root pruning scissors separate from the scissors used for pruning the tree, as these tend to get blunted because of the particles of soil etc that it cuts through, now there’s another thick root here so I’m gonna just take this out and I’m going to bare root this tree so I’m gonna tidy up and we’ll catch up shortly. I have managed to clear the soil as much as I possibly could it was quite hard. The soil had broken down and become very clay like and it’s virtually like a brick and removing it was not easy and I have tidied it up as much of the roots as I can and this is the root structure that I’m going to retain.

I have prepared this pot, at the bottom you can see the wire mesh is secured that with hairpin bends and then these are the anchor wires to secure the tree and and if you want to see how the pot is prepared then on the right hand side of the screen there is an info card, click on that and you’ll be able to see how the pot is prepared and I’m going to start repotting it and I’m going to put this grit aboue the wire mesh and the holes, the grit also helps with the drainage and I’m just going to continue adding this once, bonsai soil. This is actually cat litter it works very well and I also use my own bonsai soil mi. If you want to see how to make bonsai soil mix and again click on the link in the info card on the right of the screen and it will take you to a video which shows how to make bonsai soil mix.

I’ll place the tree in the pot and I’m going to secure it. Right, that should do for now. let’s have a look, …. looks okay, making sure it’s standing straight in the pot and add more of this cat litter. I’ll put a link in the description for this cat litter. This is available only in the UK as it’s manufactured in the EU but if you are abroad you may have your own equivalent it’s a basically clay which is fired to very high temperatures and it becomes what it is, it turns into solid pieces it’s virtually like lava rock. I’m using the chopsticks to drive the soil in between the roots where I have bare rooted the tree so there’s absolutely no soil left and in the roots so this process will drive the soil between the roots and take out air pockets.

It’s going down quite fast as I work my way around and if the air pockets are not removed the roots in the air pocket can dry and the tree can die. That’s the extreme but it’s best to do this and not take any chances so I have finished securing the tree and will now cut off these excess wires from both sides and hide the wires where the twists are and add more soil and finish it off it does need a little bit more soil and then we’ll water it thoroughly I don’t sieve the cat litter, there is very fine dust and it basically comes out on first watering, it needs very very thorough watering and the dust basically just drains out at the bottom and I’ll just remove some of these surface roots, there aren’t very many but just a few, handful.

Right I’m going to again tidy up and we’ll catch up shortly. Well here it is Aacer Buergerianum Trident Maple repotted and now ready to be given a thorough soaking. I will keep watering until the dust has run clear. That’s enough, the waters running clear at the bottom so we’ll stop and let it drain before we carry on. Its all done ! I’ll give it a quick 360 that’s the front and go around this way and I’ll do an update sometime in late spring when it’s in full leaf and back to where we started. That’s the Acer Buergerianum Trident Maple and I’m glad I’ve done it, otherwise it would have been next year. I couldn’t take a chance with repotting this in the summer it’s fairly pricey so but we’ll have a go with one of the cheaper trees.

The reporting is complete and the tree will be watered normally and it will do well in the in its new soil in the new pot. The pot is slightly bigger and I measured up the tree and the pot at its widest point should be 2/3 of the height of the tree from the top of the soil to the apex of the tree whether it’s an oval pot or a round pot if you measure the widest point it should be 2/3 of the height from the top of the soil to the apex.

That’s the rule for choosing the size of the bonsai pot to make sure that your pot is the right size. Now this is one of the things that not many people speak about. This is one of the little secrets that not many people talk about but here it is and now you know how to get your pot size right every time. If you haven’t subscribed then please do so and also ring the bell icon and you’ll then be able to get notification of my updates and you won’t miss anything and you’ll pick up more bonsai tips, tricks and secrets, which I’m here to reveal.

Until the next time. This is Iqbal Khan for mikbonsai in West London and now for the afterthought. I usually meet my girlfriend at 12:59 I like that one too one time. you dig . You dig. .

Nursery plant to Fuji Cherry Bonsai Tree; KOJO-NO-MAI make instant bonsai tree -Part 2 | mikbonsai

Hello the spectral card of a petiole a very warm welcome to my bonsai channel a particularly warm welcome to my regular viewers and subscribers and if you haven’t subscribed yet I suggest you hit that subscribe button below and subscribe now and also click on the del and kick the box so that you get notifications of all my future uploads today I have got a real treat for you within the second part of the how you can make a bonsai free from energy stalk at home and I have been working on this huge charity cut off their cover and bury it in going inside you I’m now going to remove some of these other dead branches also it looks like the tree was facing that way and all the Roses on this side so I’ll have to wire some branches and spread them out a bit to improve the placement of the branches let’s all clean up these dead tranches a little stamps little bit broken Tom share the top where the moves that it looks like that this was the on the trunk divided into two here and then if you are beginning to do up here and have to make a decision as to let’s remove one of the more retain them I’ll just clean up the dead branches first and we’ll have a look at drunk dividing into three and just looking more like a bush now as opposed to a bonsai so I’ve decided to remove this little branch so we will do that now what area opens via tree up quite the therapy and now I can continue with the tuning of the Ganges and also that point is here at the top these are a couple I’ve been working with the top and start thinning out and reducing the launches will continue at that some older projects and now we have a new leader this is this relatively new leader remove all these others plant and shorten them aha that’s interesting we have another list plaintiff has 14 – – and I’m going to retain that fork the top just remove this drawer that is crossing over and perhaps reduce yes here and also reduce these branches of going south but probably why are these and then yeah why this down and also perhaps maybe while one of the targets in this side still and that don’t even say like it seeing as I move the Protestant one side so there take those out I have wired up a few branches and will now provision them and hopefully that should be it for today a little bit of movement in this launch and can you cut back to lock there in a son can go up a little bit too low and this one can be shortened that welcome there that can be shortened to there and also shortly and at law or shorten this top up there and reduce that ah clean up this cut it takes out by reducing it it will help remove the tape up that should do for now and I will let down so came using a fine mist spray to totally rocked Italy and then after it’ll be placed in a complete shade for the next three weeks I was quite funny and hot it needs protection from the Sun as powerful now folks thank you very much for watching and watch more please subscribe this little con sonic bonsai in London my wife told me to stop impersonating a flamingo I had to put my foot down so now that’s position where for you and if you are visiting and you haven’t subscribed now’s the time to six dots hit the subscribe button below and also click on the bell get the box to ensure that you to see all future notifications of my uploads and also reproduce humor at the painting

How to Grow Croton Bonsai | 2 Croton Bonsai Repotting | Bonsai Trees for Beginners //GREEN PLANTS

Welcome to my channel now i’m going to show you Croton bonsai re-potting it is a three years old Croton bonsai this bonsai needs re potting because roots have filled the container and it has overgrown roots hold the soil together in a pretty tight loosen up the soil remove the tree carefully from its pot see the roots are almost overgrowing it is time to re pot removing the old soil carefully use bonsai root rake to carefully remove the soil if you don’t have bonsai root rake you can use chopstick or small stick to remove the soil when you are working avoid damaging the main root system and do not soak in water to remove soil because you can’t get the root ball prune all long , large and out grown roots do not prune more than 40% of all roots next i decided to replant the tree in another bonsai pot because i think the old pot haven’t enough space placing a mesh net or jute cloth piece to cover the hole now i’m just putting a thin layer of small stones in the bottom of the pot for drainage purposes then fill the new fresh bonsai soil then place the tree in position After placing the tree in the pot fill the bonsai soil this fresh soil should be worked in around and under the roots and also avoid leaving any air pockets make sure to fill all the air pockets around the roots use chopstick or any small stick and fill the air pockets after filling the soil add the stones or moss on top of the soil this will keep the soil moisture after repotting water the tree thoroughly use sprayer to water it’s an another type Croton bonsai now i’m going to repot it in another bonsai pot loosing the soil and remove the tree carefully from its pot i just use a small stick to remove the soil after removing the old soil roots pruning i just cut long and outgrown roots next repotting it in a bonsai pot covering the hole with a jute net and add the thin layer of stones and then put the bonsai soil and place the tree in the position and then add the bonsai soil after all watering to the tree with a sprayer next after repotting the trees keep them in shade for few days and then you can move them in sunny area thanks for watching

12 Rules to Bonsai Branch Selection, Be the Creator

Hello! This is Samar … welcomes you to Be The CREATOR channel In this video I’m going to share…. 12 rules to Bonsai branch selection i.e. …when we make bonsai … which branch should we grow and … which branch should we prune I’m sharing this video tutorial on request of some of my … bonsai lover friends For all beginner… bosai lovers … it’ll be very useful video tutorial For easy presentation I’ve … made this illustration Look at the tree … First let your tree grow well… for at least 2 to 3 years , then … you think about branch selection Before branch selection … choose the front of your tree After that select the bonsai branches If the branch structures are not properly visible to you Then defoliate it first Now all the branches …

And their layout will be visible to you Roule No. 1 Branches growing from the ground level… are to be pruned Because … They are not bonsai suitable branches Rule No. 2 Branches directly pointing towards you… remove them. These are called Eye poker branch It covers the bonsai apex …. it should not be Rule No. 3 Branches growing from the similar height … of the trunk line…

Towards opposite direction You can grow any one of them You have to decide which branch is … more authentic …. to grow and prune the other Look at this branch …. has grown from inside of the curve…. should be pruned Branch growing like this … deteriorates the beauty of a bonsai Rule No. 4 There should not be any parallel branches on bonsai Adjacent two branches … growing towards same direction … then they are not bonsai suitable at all Keep any one of them Here you have to decide, which one to be pruned and …

Which is to be grown Between tow branches shown in the picture, this one … is more suitable… so we have to prune this branch Rule No. 5 Branches growing from almost same point must not be thre You have to prune one of them Rule No. 6 Any branch … growing vigorously compare to other branches… Prune it Branch like this can damage your bonsai Due to this, growth of other branches can be stopped Dieback is also possible Rule No. 7 Any sub branch … from any branch …. growing towards opposite direction, prune it Rule No. 8 Any branch that is growing straight downwards …

Prune it Rule No. 9 Which is growing straight upwards Prune it too Rule No. 10 The leader of the tree i.e. the tip of the main trunk line or apex… has to be pruned By this the growth of the tree will be controlled Otherwise the whole energy will be spent to grow the apex Rest of the branches which are growing in bottom … will dieback eventually Rule No. 11 Grow the secondary branches grown from the primary branch And prune the tip of the primary branches Rule No. 12 Up to one third of the total height No branch should be there Here this branch is to be pruned too In result the trunk line will be well visible And will be look like a matured tree Hope, the 12 rules of bonsai branch selection I shared, … you understand Still if you have any doubts or question then please ask me in the comment section bellow Now watch the branch selection of a Shimpaku Gold Juniper If you want to learn the authentic way to make bonsai …

and till now … not a subscriber to this channel Then press the Subscribe button surely Because This is the only Indian channel…. to learn authentic Bonsai making Press Like and Share button if you like the video And allow me to say Goodbye See you soon on next video .

How to make bonsai tree Fuji Cherry or Prunus incisa Kojo-no-mai Bonsai Trees From Nursery Stock

 Hello folks welcome to Ma-Ke Bonsai. This is Mark D’Cruz. Today, I have Adriana with me and we’re going to pot this Fuji Cherry which make beautiful bonsais. This particular picture is of a tree at Kew and you can see it has this beautiful weeping habit which we will try and replicate over the next few years of training. Adriana got this for 8 pounds from the garden centre. She’s going to take it out of the pot and work on the nebari. You start working on the nebari from the top and move down. Move away soil with a chopstick and then gently cut away the roots that have been exposed. Brush the trunk and the nebari to remove any soil and moss that may have collected on the trunk. The trunk is the oldest part of the tree and by exposing it properly, you will show off the age of the bonsai as you are creating it.

She’s working on removing some of the bigger roots at the moment. Tapering the root ball so that it has a slope to the centre of the tree. Adriana carefully measures the depth of the pot and the width of the pot to ensure that she has the root ball to the right size. She would mark out the areas that she needs to cut away although keeping in mind that there is one centimetre space between the root ball and the pot surface. She uses little tags to mark where she’s going to cut to. Because this is a peat based potting mix from the garden centre, it’s actually quite easily done. But with normal bonsai soils, it’s a little bit more tedious but nevertheless, the same instructions have to be followed.

What about that Mark? Is that too high? I would go down one centimetre, one and a half centimetre because you’ve got to put soil in it. And then that height is more or less what you want it to be. I’m going to open it a bit more here, as it grows. That pot is absolutely perfect for it. Adriana adds a thin layer of soil at the base of the pot and then makes a little mound in the centre. She places the root ball in it, jiggles it and fills it up with soil. And then ties the tie wires that we’ve had in the pot. She first hand ties it and cuts away the excess and then ties it with the jin plier to make sure that there is no slack in the tree.

However, this is a relatively tall tree in the pot and it will need additional support while the roots extend into the new soil after which it will be fine. Towards the end of the video, you will see how we provide the additional support. Adriana is using the jin pliers now to tighten the wire and remove any slack between the soil and the wire. Adriana is topping up the surface with some fresh soil.

The soil will provide a new area for fresh roots at the top to grow. After a quick dunking, she is adding a thin layer of sphagnum moss onto the soil. The sphagnum moss helps with retaining moisture in the pot and also ensures that the topsoil doesn’t run away when you water it. After the sphagnum moss has been done, she will add green moss onto it at a later stage.

She now flattens it down with a spatula to have a nice even gradient from the top of the pot to the top of the nebari, the rim of the pot. And it takes a little bit of doing but the end result is And it takes a little bit of doing but the end result is a very clean, freshly, nicely done pot. And that’s what we’re looking for. She’s now tying the additional guide wires to ensure that the bonsai is held firmly in the pot so that there is no chance of even the slightest bit of movement once it has settled into it. Adriana is using jute twine to provide the additional support for the tree and this stage is quite essential. Makes the tree much stronger. If you do not add these guide wires on a tall tree like this, the tree tends to move with the breeze and the watering and its recovery can take much longer. But there we are. Here is the end result of the day’s work. It’s a nice-looking tree and it will develop into a weeping style as we go along.

The top branches will be curved down and wired down or weighted down depending on which approach Adriana takes. Thank you for watching. We hope you liked the video. If you did, give us a thumbs up, otherwise there’s the other thumbs. But either way, do subscribe and we hope to see you again soon. Thank you for watching. This is Mark D’Cruz signing out. .

How to make bonsai tree Fuji Cherry or Prunus incisa Kojo-no-mai Bonsai Trees From Nursery Stock

 Hello folks welcome to Ma-Ke Bonsai. This is Mark D’Cruz. Today, I have Adriana with me and we’re going to pot this Fuji Cherry which make beautiful bonsais. This particular picture is of a tree at Kew and you can see it has this beautiful weeping habit which we will try and replicate over the next few years of training. Adriana got this for 8 pounds from the garden centre. She’s going to take it out of the pot and work on the nebari. You start working on the nebari from the top and move down. Move away soil with a chopstick and then gently cut away the roots that have been exposed.

Brush the trunk and the nebari to remove any soil and moss that may have collected on the trunk. The trunk is the oldest part of the tree and by exposing it properly, you will show off the age of the bonsai as you are creating it. She’s working on removing some of the bigger roots at the moment. Tapering the root ball so that it has a slope to the centre of the tree. Adriana carefully measures the depth of the pot and the width of the pot to ensure that she has the root ball to the right size. She would mark out the areas that she needs to cut away although keeping in mind that there is one centimetre space between the root ball and the pot surface. She uses little tags to mark where she’s going to cut to. Because this is a peat based potting mix from the garden centre, it’s actually quite easily done. But with normal bonsai soils, it’s a little bit more tedious but nevertheless, the same instructions have to be followed. What about that Mark? Is that too high? I would go down one centimetre, one and a half centimetre because you’ve got to put soil in it.

And then that height is more or less what you want it to be. I’m going to open it a bit more here, as it grows. That pot is absolutely perfect for it. Adriana adds a thin layer of soil at the base of the pot and then makes a little mound in the centre. She places the root ball in it, jiggles it and fills it up with soil. And then ties the tie wires that we’ve had in the pot. She first hand ties it and cuts away the excess and then ties it with the jin plier to make sure that there is no slack in the tree.

However, this is a relatively tall tree in the pot and it will need additional support while the roots extend into the new soil after which it will be fine. Towards the end of the video, you will see how we provide the additional support. Adriana is using the jin pliers now to tighten the wire and remove any slack between the soil and the wire. Adriana is topping up the surface with some fresh soil. The soil will provide a new area for fresh roots at the top to grow. After a quick dunking, she is adding a thin layer of sphagnum moss onto the soil.

The sphagnum moss helps with retaining moisture in the pot and also ensures that the topsoil doesn’t run away when you water it. After the sphagnum moss has been done, she will add green moss onto it at a later stage. She now flattens it down with a spatula to have a nice even gradient from the top of the pot to the top of the nebari, the rim of the pot. And it takes a little bit of doing but the end result is And it takes a little bit of doing but the end result is a very clean, freshly, nicely done pot. And that’s what we’re looking for. She’s now tying the additional guide wires to ensure that the bonsai is held firmly in the pot so that there is no chance of even the slightest bit of movement once it has settled into it.

Adriana is using jute twine to provide the additional support for the tree and this stage is quite essential. Makes the tree much stronger. If you do not add these guide wires on a tall tree like this, the tree tends to move with the breeze and the watering and its recovery can take much longer. But there we are. Here is the end result of the day’s work.

It’s a nice-looking tree and it will develop into a weeping style as we go along. The top branches will be curved down and wired down or weighted down depending on which approach Adriana takes. Thank you for watching. We hope you liked the video. If you did, give us a thumbs up, otherwise there’s the other thumbs. But either way, do subscribe and we hope to see you again soon. Thank you for watching. This is Mark D’Cruz signing out. .

Bonsai Trees – How to Bonsai Jade – Old Jade bonsai tree care and maintenance- Part 2 by mikbonsai

Hello everyone this account and we’re looking at a 25-year old Jade and different update walking happy with piece of functions which are leaning down like then balls in my tree and I have spoken with Lucy she’s the owner and explain to her that the team would benefit from removing these want no hanging branches that it hadn’t been approved for a very very long time and done it’s its cognate send leg lunches and i’m going to prune it back and the start off by removing these lunches here when soft by the moving vehicle hanging branches back to their and this also have come off and immediately this one has of stand up with this particular launch and also well now pulling these adventures that’s when everything goes to that there time-saving with this went back to the second set of leaves and same thing with this length i’m just going to come off completely this one love two short of i’m going to remove it partial it a lot there and see like this time document obviously what to do it if I may end up removing it and that’s what I’m going to cut back to their definitely come off completely and same with the front will come back to back there that’s why i’m also going to the most about their ok then shorter these you can go right back to be faster fleas sending not trying to leave not remove that these two at the top okay i’m going to continue moaning you’re handing it and get back to the second little trees someone to continue working on the top you will not hear back sort of actually calling also take that off reduced anything that leaves and up here continue with the morning of the new projects actually do for now I’m going to wire this app this is so hopefully it should stay in case i’m in the process of applying this branch generally they are quite brittle hopefully i’ll be able to bend it slightly and create a government attempted to reduce the child so he knows thinking with this one that’s enough for today and we’ll keep one thing I can see how it develop it should be ok it was back but there are some tiny tiny but sort of scene here which means not deliver to the camera and very very tiny playing but not back but it was producing further we particularly the october but have branches I want to remove too much voltage at this stage but this time try not to like to cut it back this I’d like to reduce and same thing with this one of like to do starting with leggy and movies and wonder why it up how that goes is that real quick and I think it’s child involved being happy and quite considerably not done it will still need further reduction in the size of the project we count down here is quite sick but they need to come down to about here around another 56 inches that should do and after the front i will be looking after it until it leaves salt and then it will be returned to its owner Lucy and it will need for the reduction colleges and future network we producing to live another x width inches we then it’s really strong growth which would support the candidate we added a new element and for watching to watch more please subscribe this is nick own father McNulty line in restaurant an afterthought not black particles and cannibals they had coach a clown and we’re 15 30 soft clouds and one going to the other and look them in the eye and said he’ll be tastefully Wow

How to Grow Maple Bonsai From Seeds /Japanese Maple / for beginner – 6th june 2017/Mammal Bonsai

If you have not yet subscribed to the Mammal Bonsai channel Then subscribe to the channel by pressing the red button And press this bell icon so that when I upload a new video you get the message Hello Friends, i am Vijay saini & welcome to Mammal Bonsai . i have some queries that how to grow japanese bonsai from seeds Maple Bonsai seed does not mean that the seeds will become bonsai only these seeds are normal maple tree seeds If we grow up they will become a normal tree So there is no seed of Bonsai. We have to make it bonsai it has to give a shape So that’s why I bought some seeds Yesterday I had received this seeds So I thought I should share with you maple seeds need cool climate to germinate While there is a lot of heat here, and seeds can not survive this summer.

But i brought these seeds for try it i will try with different method i will tell you how you can also try it if you have these seeds so i will tell you that how to grow it so first of all open it and take seeds now open packet I have not bought seeds online yet have bought for the first time today because these seeds not available here so i brought it there is 10 seeds in this packet look this may be its bill and these are seeds There were 10 seeds written in it. But there is more seeds in it more than 10 seeds it is bill of 99 look this is seeds now talk that how to grow so first method is that Take this type of zip lock bag and fill it in the peat moss when will use peat moss spray lightly with water for keep moisturising don’t take big bag take bag according your seeds take moisturized peat moss and mix seeds in peat moss then lock zip and keep in refrigerator after 3-4 month is will germinate then you can shift in different pots one other methode is that mean keep it to soak water at night then morning you can keep in peat moss bag after zip locked keep it in refrigerator in this way it grow fast This is the way to grow it fast that ..

Grow direct ut for that you need fresh seeds mean if you collected seeds from tree then you can grow it direct in the soil so then seeds grow quick keep it in refrigerator in october -November and then sow it in the february then also grow fast because here germination process fast in february plants growth also fast so we can grow like this so i will tell you both method sp let’s start its seeds same like rosewood its seeds like rosewood seeds these seeds are mixed seed , here see two type Look i show you you can see two type seeds here its different its looks green and this verity is different take a zip bag like bag if you want to grow 10-20 seeds then You take a little bigger bag than this But I’m experimenting and I will grow with many method And see which of these 5-7 ways is successful And the way I succeed I will share with you so now i will tell you common ways to grow maple seeds take peat moss like this but i haven’t peat moss so m using cocopeat fill the coco peat in the bag It must be aware that there must be a moisturising in it not dry look , we filled it now put the maple seeds in the bag i will put 4 seeds i will shake it after put seeds So that seed can be mix n Coco peat or mix it in cocopeat with your hand I have put the seeds in it and now I will seal it.

I will lock zipp like this we have zipped it and now keep it in the refrigerator I will keep this in refrigerator For 4 months And then we will see the result of what comes We will continue to see this in between and then any seeds sprout so this is our first way we can grow like this You can soak it by planting it like this 2nd method is that how to grow direct in the soil for that i will use this pot Although this method works well on the fresh seeds We should sow from January to February But we try and see what goes on in trying when you grow direct then you can grow in bonsai soil also but for that need cool climate and here not good climate for maple i will use bonsai soil for these maple seeds look ,we will use this bonsai soil now i will sow the seeds in the soil so i will put 2 seeds look this One will grow this kind of seed and one this type mean we put 2 seeds and put some soil on it now apply some cocopeat now watering in it seeds planted now keep it to germinate i will not keep it in refrigerator, i will grow it like normal seed Let’s see which way is successful Apart from these 2 methods, I will see the seeds which are still remaining in new ways And see what the way is successful If they were successful in some way So I will share that method with you.

At the moment I have told you two methods you also can try like this this method i mean poly bag method take long time may be it take 3 -4 months and this is normal method i will try another method too and i will share that method with so if you have japanese maple seeds then you can also grow .rainy season coming soon so rainy seson best for growing seeds i will tell you how to care it after germination after germinate your seeds then you can shift in a little big pot and keep in the semi shade like keep under big tree shade Where the sun comes but in such a hot sun take care of watering keep moisturising in the soil If one tree is grown here successful then Then we will have many seed Some friends say that maple will not grow here So I say that we should try the tries to do it.

Trying to get success can sometimes happen so i have some more seeds of maple and i will try these seeds with different methods look , we have many seeds more When I bought it was written there, it has different color seeds one light blue ,one red ,one yellow and one green color so So there were four colors shown when it grow then we can see the color ok friends m trying to germinate these seeds with new methods If a seed is germinated then I will show you the update ok friends see you in the next video till then goodbye .

Larch Bonsai Trees how to care for Larch Larix decidua (European Larch) Pruning & care Part 1

Today I’m working on a notch it has been in this training bought for a number of years now and I’ve been going there for a specific purpose there is a arch group planting in the middle of which one tree is defective and it ruins the whole composition and this tree is being drawn with intention of replacing that defective cream I’m going to start at the work marry up these donkeys are very low so these are going to remove there’s also very loud this is going to come off – very very very close together those I’m going to remove as well but create more space between the bouncer the mobile volunteers are subside as they haven’t received as much Sun the word is shortly planted at the top to allow the Sun and the light to get through to the lower branches we won’t prove too much of the lower branches just shorten about you at the top these pointers of has impaired one of them have to come off and just continue working up again responders in this to God is going to the same point someone comes off and continue working my way up here also to blog is coming from the same point for this lower one is a fellow one that comes off and just work around this is too close to the trunk or just coming out for a primary point is to close the trunk so we’ll remove this power janessa’s again make a spread crotch here that comes off and shorten this concert it’s more smaller than this comes down here and same thing singles and up here and also as a t-bar effect here I’m going to attend this one and remove perhaps remove this one and return who not sure if I’m innocent leave then primary and we’ll come back I’ve heard some people say in doubt cut it out at the trees you can’t put it back so we have a dead branch here again is coming out of very close to another branch how is remove the dead and get it in this one and it’s very congested up here so we’ll have to spin it out of it we now move to the apex and cut short these punches they’ve got very long at the top and same thing with this one here I’m going to remove this launches quite thin and not much going on zoom out a little bit madness noise I’m going to remove is quite thin and too many launches up here so this one can come off right and let’s see now please don’t use are virtually coming out of the same spot these days so I’m going to remove this one yeah all on this side you already have branches so from this side we don’t so I’m going to retain this one and remove this one here remove it right up to the trunk right sector and also turn this up into gender founded a little bit more after the data and also remove the growth rather than close the trunk if a good makes the tree look juvenile so I mean as well so there are two branches coming out will same spots up and this top one looks with dead so does remove that one or clean apart on well now have another look at the tree and see if anything else needs to be done if any dead branches or two launches too close together I’ll just give it a turn and see if there’s anything else I can spot right now this one here is sound bending downwards are shortened that a bit because get launched here and Suns coming out as kind of straight into my eyes I’ll flip and move slightly and take another look it looks okay coming up here perhaps another minute on your shelf and remove this one cannot be round and also these love goals at the straight-up trunk will take that out also too close to the trunk apex will take that out and little bit more tidying up to the gum at the apex will remove that and also this one here had fly to the top I think that as far as I want to go today and we let it go for the season before I put it in the new plant large group planting that I have and yeah this is coming along quite nicely and it’s also has a nice ah of nebari tidy up the surface root area there is a little bit of moss on the plank at the base where the surface which is hood salt we just please clean it with a toothbrush and continue the other side is a whole lot of new route not a truth serum relief cause as we are remove this accessory just can you tidy up just going to scrape plate them off say we dry the part I haven’t watered it today he’ll be able to pull them out without too much difficulty here’s the cocoa brush to wash it all off unfortunately we are playing lying and I sometimes I forget well you know here the thing and I’m sorry for that top of the pot cleaned and tidied up and take a good look at the trees before I wrap this up we have done as much tidying up as I can today so that’s cool the work for today and didn’t be left as well under the net CV enough like hope to put it into the blue planting that I have in mind for this thanks for watching and watch more please subscribe this is picnic column for big bonsai in left London until the next time now for the afterthought what do you call a nose with no body nobody knows